MS2200 EN 11/17/03 1:59 PM Page 14
Radio
EN Selecting Tuner Band
1.Press SOURCE to select TUNER.
2.Press BAND to select radio band.
Tips:
Your audio system has 32 preset stations.
Auto Preset Programming (FM only)
Press and hold the BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased sta- tions cannot be recovered.
Tuning to a Station
Press SKIP BACKWARD or SKIP FORWARDto select frequencies.
87.50 MHz
Using Presets
The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.
•Press TUNE•PRESET to toggle TUNE and PRESET mode.
•Press SKIP BACKWARD or SKIPFORWARD on the main system or PRESET UP or DOWN on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (FMPR:01 is FM preset 1)
PR:01
Manually Setting Presets
1.Press the TUNE•PRESET button to enter TUNE mode.
2.Press SKIP BACKWARD or SKIP FORWARD to access the desired frequency.
3.Press the PROG•SET button once.
4.The most recently accessed program location will be displayed.
5.If a different program location is preferred, press SKIP BACKWARD or SKIP FORWARD to move to the desired preset number
6.Press PROG•SET to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST. to toggle between FM mono and stereo for stereo FM stations. (Remote Only)
9