2370 - Euro - Rve02 8/13/99 4:34 PM Page 9
THE CD PLAYER
Prog/Display SmartResume (for RCA only)
When you stop CD play or power off the unit (without disconnecting power sup- ply), SmartResume is automatically activat- ed. It stores all the current settings and modes: current track, Shuffle, time display, Mode (Repeat/Repeat All/Program), and ESPX. When play mode is on again, the unit RESUMES to the settings (unchanged) and plays from where it left off at.
If CD compartment lid is opened, then SmartResume stores only the following modes: Shuffle Mode (Repeat/Repeat All), and ESPX. Other settings such as track play, time display, program setting and memory are all reset or cancelled.
Repeating
You can replay the entire CD or one track as many times as you wish as well as listen to the beginning of each track for 10 seconds.
Press MODE successively to
1.Replay the entire CD .
2.Replay the current track
3.Replay the beginning of each track for 10 seconds
(The number of the track being played will be displayed and SCAN will appear.)
4. Press again to
Program
EN
This function lets you listen to the tracks you selected in the order you want. The CD player must be in Stop mode.
1.Press PROG. P will appear in the display.
2.Select the track to store by pressing
&press PROG again to
or confirm.
3.Return to step 2 to store other tracks.
4.Press play button to listen to your programming.
Note : To prevent excessive battery con- sumption, the unit switches off automati- cally after 10s if no key has been activated. When programming, the unit can switch off if you do not press any key within 10s. If the unit swithes off, the programme will be stored in memory. Resume program- ming as normal by turning the unit on again.
You can program up to 24 tracks.
To play your program again, press play. To add/edit tracks to the program, go to stop mode ; press and hold PROG button again. Refer to step 2 of the above para- graph.
6
