Technicolor - Thomson TU-HDT104A manual Remote Controller, Rear Panel, Box Contents

Operating Instruction Book

TU-HDT104A

2.2Rear Panel

•AC Power Mains: (100 - 250V~; 50/60 Hz), 1.0 A.

•RF In: For connection to cable from outdoor terrestrial antenna.

•RF Out: For connection to your TV antenna IN or VCR RF IN.

•S-Video: Y/C component video for connection to TV.

•CVBS: Two composite video outputs for connection to TV, VCR or other A/V receiver.

•AUDIO: Two sets of stereo audio outputs for connection to TV, VCR or other A/V receiver.

•YPbPr: Y/Pb/Pr component video for connection to TV.

•RGB: R/G/B/HS/VS component video for connection to TV or monitor.

•Coaxial: Digital Audio output by coaxial.

•Optical: Digital Audio output by optical.

•Serial Port (RS232): For system maintenance.

•A/B/C Switch: Switches for video output mode selection. Selection options are listed in the table.

2.3Box Contents

The box that carries your Digital Receiver should also contain the following items:

•Remote Controller

•Two batteries (AAA Size)

•RCA video cables (one white / red, the other red / green / blue)

•User’s Manual

3 The Remote Controller

3.1Preparing the Remote Controller

•Remove the cover of the battery compartment (on the back of the handset)

•Insert 2 AAA (1.5V) batteries. While inserting, observe the + and – markings indicated inside the battery compartment.

•Replace the cover

•Test the remote controller by pressing any key and check if the IR-LED (Red) on the front panel of the receiver flashes.

5