Technicolor - Thomson TU-HDT104A manual Mode C SD, TV/CVBS, Audio Connections

TU-HDT104A

Mode C (SD, TV/CVBS)

Connect the CVBS composite video output socket on your digital receiver to your TV’s CVBS video input socket.

Connect the S-Video (Y/C) component video output socket on your receiver to your TV’s S-Video input socket. (Refer to D)

Note: Cable is not supplied.

Note: When unit is in Mode C, there is no output from the YPbPr sockets.

Audio Connections

If your display device is equipped with Dolby Digital and/or MPEG audio decoding capability, you may connect the Digital Audio output of your digital receiver to the display device’s Digital Audio input using either the Optical or Coaxial RCA socket. (Refer to E) You may also connect the digital audio output to your A/V receiver if it is capable of decoding a Dolby Digital / MPEG digital audio stream.

Note: Cable is not supplied.

If your display device and/or A/V receiver does not support Dolby Digital / MPEG decoding, you will need to connect the L/R Audio output RCA sockets on your digital receiver to the stereo L/R Audio inputs of your display device and/or A/V receiver. (Refer to F). If your A/V receiver supports Dolby Pro Logic decoder, you can switch ON the “Downmix-Surround” function (Page 21).

Operating Instruction Book

(D) CVBS / S-Video Connection

(E) Digital Audio Connection

(F) Analogue Audio Connection

8