Manual Channel Set-up

tx807en2 15/01/03 12:26 Page 5

With the manual set-up

1.Display the menu by pressing a number of times on the remote control menu key:

-twice for the mono TV sets.

-3 times for the stereo TV sets.

The first line (Standard) is selected.

Depending on the model of your TV set, youÕll have to select from the options listed below the one that fits with your country:

EURO	: Western Europe, Tunisia, Morocco
FR	: France, Luxembourg
UK	: United Kingdom, Eire
DK	: Eastern Europe, Middle East, Africa,
	French DOM-TOM

Select corresponding option by means of the directional keys Left/Right.

2 .Select the Mode line through the Up/Down directional keys.

3.By means of the Left/Right directional keys, select ANTENNA (reception through an aerial antenna) or CABLE (reception through a cable network) for a Channel set-up, or MHz for a Frequency set-up.

4.Select the CH or CC line through the Up/Down directional keys.

5.Start the set-up in a decreasing or increasing order by means of the Left/Right directional keys.

When a channel is found, the pictures appear. If the picture quality is poor, make use of the directional keys Up/Down to select the line ->.<-and try to improve picture quality with the directional keys Left/Right.

6.Select the Decod. line through the Up/Down directional keys

7.If the station is encrypted and if you want to connect a decoder to the AV socket, tick the box with the Left/Right keys.

8.Then select the Pr line through the Up/Down directional keys and enter the channel number corresponding to the pictures. You may also use the Left/Right keys.

9.Select the Text line through the Up/Down keys and choose the character set table to be used for videotext:

1:Western Europe

2:Eastern Europe, Russia

3:Greek

4:Arab

5:Ukrainian

6:Bielo-Russian

For more details, refer to the table on the next page.

10. Store the programme by pressing OK.

To find the next programme, re-start Channel Set-up by means of the directional keys Left/Right.

Once the set-up achieved, close the menu through exit.

Adjusting the Picture

Press the menu key once to display the menu. Through the Up/Down keys, select the function you want to adjust (Brightness, Colour, Contrast, Sharpness, Tint). Adjust with the Left/Right keys.

Adjustment of tone is only possible and necessary for an NTSC image.

If you wish to preserve these adjustments as preferential, press the red button to memorise them. YouÕll then be able to recall them later on.

Close the menu through exit.

Settings are stored until you proceed to another change.

Adjusting the Sound

(only on stereo models)

Press the menu key twice to display the menu. Through the Up/Down keys, select the function you want to adjust (Treble, Bass, Balance, Mode). With the Left/Right keys, adjust the Treble or Bass level, the balance between left and right paths and the type of sound you want (Mono or Auto).

If Auto has been selected, the TV set will automatically adjust to the sound transmitted by the channel.

If you want to preserve these adjustments as preferred settings, press the red key during 3 seconds to store them.

YouÕll then be able to recall them later on.

Close the menu through exit.

Settings are stored until you proceed to another change.

Technicolor - Thomson TX807C Manual Channel Set-up, Adjusting the Picture, Adjusting the Sound

Models: TX807C