tesco english manual 19_22_14 paPage 1 30. 4. 2009 11:00:52
ATTACHING/REMOVING THE STAND & WALL MOUNTING
Attaching the stand
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Removing the stand for wall mounting
1)Remove the screws shown
2)The stand will now come off
IMPORTANT— BEFORE DRILLING ANY HOLES IN THE WALL ENSURE YOU ARE NOT DRILLING WHERE THERE COULD BE ANY ELECTRIC WIRES, WATER OR GAS PIPES
THIS TV REQUIRES A VESA
100 WALL MOUNT, OR EQUIVALENT
100
1)Remove the four screws highlighted below.
2)The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes are indicated in the picture below
Important – If wallmounting this TV, |
|
only use the screws already |
|
provided in the wallmounting holes. |
|
Using other screws which are longer |
|
could cause irreparable damage to |
|
internal parts. | 9 |
