First Time Installation
The user can use this item to load default settings, which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time Installation” menu item and press OK button, then you will be asked whether or not to delete the settings. Selecting “Yes” by pressing OK button while the “Yes” is highlighted will delete the existing channel table.
Then you will be asked to confirm for deleting all channels and settings:
By selecting Yes and pressing the OK button, the existing channel table will be deleted.
After factory settings are loaded, “First Time Installation” menu will be displayed.
The menu which is displayed for language selection appears on the screen at first. By using “
” or “
” buttons, select the desired language option, and press OK button to activate.
After then, “First time installation” On Screen Display (OSD) will appear on the screen. By pressing “
” or “
” buttons, select the Country you want to set and press OK button (* only for EU countries).
-Next, active antenna mode selection On Screen Display (OSD) will appear on the screen.Use “
” or “
” to set and press OK to continue.See the section, “Initial Settings” for more information.
After active antenna mode option is selected, a message asking for automatic search appears on the screen:
Press the OK button to start installation. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen: This process is same as described in Automatic Search section.
Media Browser
•To display Media Browser window, press either “M” button on the remote control and then select Media Browser by pressing “
” or “
” button. Press OK button to continue. Media Browser menu contents (depending on the contents of your USB drive) will be displayed.
•Also, when you plug a USB device, the following screen will be displayed:
Select YES by pressing “
” or “
” button and press OK button. Media browser will be displayed.
•You can play music, picture and video files from a USB memory stick.
Note: If you plug USB stick while in analogue mode, the TV will automatically switch to digital TV mode.
Note: Some USB compliant devices may not be supported.
Note: If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. Plug the USB device in again.
Playing MP3 Files
Play This (OK button) : Plays the selected file.
Play (Green button) : Plays all media files in the folder starting with the selected one.
Pause (Yellow button) : Pause playing file.
Stop (Red button) : Stop the playing file.
Previous/Next (Left/Right buttons) : Jumps to previous or next file to play.
Shuffle (INFO button) : Plays the files randomly. If shuffle mode is enabled, previous/next function will also jump to the tracks randomly.
Loop (Blue button) : Plays the selected file repeatedly.
