To listen to FM radio:
•Fully extend the telescopic aerial at the back of the unit.
•Move the FUNCTION selector on the left side to select the RADIO position.
•Move the BAND selector on the top panel to the FM ST. (FM stereo) position.
•Turn the TUNING control to select the station you want (the FM frequency scale is the outer scale marked in MHz).
•Fine adjust the tuning so that the station plays clearly.
If you can hear a lot of background noise when playing the station, the signal may be weak.
You may be able to improve the signal strength by adjusting the position of the telescopic aerial or moving the radio to a different position.
If this doesn’t help and the noise persists, switching to FM mono reception will reduce the background noise.
To switch to FM mono:
Move the BAND slide switch to the FM position.
NOTE:- FM mono will not give the spatial sound benefits of FM stereo, but will always play with less background noise.
To listen to AM radio:
•Move the FUNCTION selector on the left side to select the RADIO position.
•Move the BAND selector on the top panel to the AM position.
•Turn the TUNING control to select the station you want (the AM frequency scale is the inner scale marked in kHz).
•Fine adjust the tuning so that the station plays clearly. You may be able to improve the clarity of the sound by rotating the radio until the sound is clearest.
NOTE:- It is not necessary to extend the telescopic aerial when listening to AM radio.
To increase the volume:
•Rotate the VOLUME control wheel on the left side towards the back of the unit.
To decrease the volume:
•Rotate the VOLUME control wheel on the left side towards the front of the unit.
6