You can store a program selection of up to 20 tracks from a CD or 99 tracks from an MP3/WMA compilation to play in your preferred sequence.
To set a program:
•Load a CD or MP3/WMA compilation and wait for it to read.
Play will begin automatically.
•Press the STOP button to stop playback (programming is only possible when stopped).
•Press the MODE button.
The display will show the PROG symbol and P01 flashing (the position of this track in the program).
•If you are playing a MP3/WMA compilation of albums, you can optionally change the album number to program by pressing the ALBUM button repeatedly (skip this step if you are programming a CD).
•Select the track number you want to program by pressing the SKIP+ or SKIP- button.
•To save this track into the program sequence, press the MODE button.
The display will show 02 flashing, indicating that you are now entering the second track in the program sequence.
•Repeat the previous two steps (three steps if you want to change album) until you have stored all the tracks in the program sequence.
Playing the program:
•Press the PLAY/PAUSE button to start the program playing.
The PROG symbol will remain on and the program will begin to play.
Selecting tracks:
•You can navigate through the tracks stored in the program by pressing the SKIP+ or SKIP- button.
Clearing the program:
•Press the STOP button twice. The PROG symbol will switch off.
9