USING THE ALARMS

SETTING THE ALARMS

You can set two completely separate alarm times (ALARM 1 and ALARM 2) and activate either or both of them to wake you with a buzzer, radio, or music from a docked iPod. You can also pre-set the station preset and volume settings that the alarms will wake you with.

The alarms are set from the remote control or from within the Settings Menu (see page 12).

Checking and changing alarm settings:

All alarm settings are made through the Alarm menu. NOTE:- Once you have completed the settings they must be saved before leaving the menu or the changes will be lost.

Checking Alarm 1 settings:

•Press the ALARM1 button on the remote control. ‘Alarm detail’ will appear on the display.

•Press the M button to scroll through and display the current alarm settings in the sequence shown in the next column.

To make a change to a setting:

1.Scroll to the setting you want to change.
2.Press the SELECT/ENTER button.

3.Press the Mor Nbutton to scroll through the options available for that setting (or times when clock setting).

4.When you have finished changing the setting, press the SELECT/ENTER button to return to the Alarm Menu.

5.Repeat the previous four steps to change each setting as required.

*NOTE:- When changing the Preset setting, choose the ‘Last listened’ option to wake to the last station you played.

ALARM SETTING SEQUENCE

Saving changes:

If you have made changes to settings and want to save them, select the ‘Save’ option and press SELECT/ENTER.

The display will confirm with the words ‘Alarm saved’.

Setting Alarm 2:

•Press the ALARM2 button on the remote control to open the Alarm menu and view the settings for Alarm 2.

•If you want to change the settings, follow the five step procedure for Alarm 1.

SETTING THE ALARM TO WAKE YOU

To set the alarm to wake you:

•Check that the Alarm 1 or Alarm 2 symbols are displayed as required. If not, set the Alarm(s) On as described in the Alarm menu section.

•If you have set either wake up mode to ‘iPod’, make sure that your iPod is docked.

•Set the radio to Standby (or set the SLEEP function). The radio will switch off and the time and date will be displayed with the Alarm Symbol(s).

WHEN THE ALARM WAKES YOU

When the alarm sounds you can choose to set snooze, which will reset the alarm for a further 9 minutes, or to switch it off.

To set snooze:

•To set snooze, press the SNOOZE/DIMMER button when the alarm sounds.

The alarm will stop and the alarm indicator and the snooze time will count down on the display. After 9 minutes the alarm will sound again.

To switch off the alarm:

•To switch off the alarm, press and hold the MENU/ STANDBY button.
The unit will set to Standby.

ALARM REPEAT

The alarm(s) will sound at the same time(s) each day until turned off via the Alarm Menu.

11