REMOTE CONTROL

AStandby buttonBFunction buttonCUp buttonDSelect/Enter buttonE{/Info buttonFDown buttonG/,/Scan buttonHSleep buttonISnooze/Dimmer button1) Alarm 2 button 1! }/Preset button 1@ Alarm 1 button

1# Menu/Standby button 1$ Numeric keypad

1% Volume down button 1^ Volume up button

REMOTE CONTROL BATTERIES

BEFORE FIRST USE

Before using the remote control, the battery (supplied) must be fitted.

FITTING/REPLACING THE BATTERY

When fitting or replacing the battery in the remote control, refer to the diagram below.

1.Press the catch across.2.While holding the catch, open the battery door.

3.Fit the battery observing polarity as shown. When replacing the battery, use only the same CR2025 type specified.

BATTERY DISPOSAL

Dispose of used batteries with regard to the recycling regulations in your area. Do NOT short circuit batteries or throw them into water, the general rubbish or in a fire.

Weak batteries can leak and damage the remote control. Replace them in good time!

5