Technika CR-109IDAB FM SETTINGS MENU, SLEEP FUNCTION, HEADPHONES, FM SETTINGS MENU, To enter the FM Settings Menu:, SLEEP TIMER, To set the sleep timer:

FM SETTINGS MENU

There are also some menu settings that are specific to FM radio operation. These settings may be changed through the Settings Menu.

To enter the FM Settings Menu:

•Set to FM mode.

•Press the MENU//STANDBY button on the top panel or the MENU button on the remote control.

A map of the menu is shown below. To scroll through available options, press the Mor UP buttons. To choose an option from the menu, press the SELECT/ENTER button.

MORE DETAIL OF THE FM SETTINGS MENU OPTIONS

SCAN SETTING: With this menu option you can set the scanning sensitivity of the FM radio to two different levels- ‘Strong stations only’ or ‘All stations’. Setting to ‘Strong stations only’ will exclude weaker stations resulting in a quicker scan. If you set to ‘All stations’ the scan will stop at every station detected, even if the signal is weak.

AUDIO SETTINGS: This option enables you to set the radio to receive FM in Auto mode (Mono/Stereo) or in Mono only. This may be useful if the signal is weak and the broadcast is noisy.

SLEEP FUNCTION

SLEEP TIMER

You can set the Sleep timer to play music for a set period while you are falling asleep.

To set the sleep timer:

•Play your choice of music.

•Press the SLEEP button on the remote control repeatedly to cycle through the sleep time options of 15 minutes, 30 minutes, 45 minutes, 60 minutes or OFF (sleep off).

The music will continue to play for the time you selected, then the unit will set to Standby.

NOTE:- Sleep time can also be set through the Settings Menu if the remote control is not available.

HEADPHONES

There is a headphone output jack on the back panel of the radio. If headphones are connected to this socket for private listening, the speakers will cut out automatically.