SELECTING A SOURCE

SOUND SOURCES

You can choose to listen to the following sources -

•FM radio

•iPod (when docked)

•Aux source (when connected via the rear panel AUDIO IN jack).

Selecting a source:

•Press the INPUT button on the top panel repeatedly to scroll through the available sources.

The symbol for the selected source will light on the display.

ADJUSTING THE VOLUME

To increase the volume:

•Press the VOLUME + button on the top of the unit.

To decrease the volume:

•Press the VOLUME - button on the top of the unit.

When the volume is adjusted, the display will change to show the current volume level setting on a scale of 00 (minimum) to 30 (maximum).

LISTENING TO FM RADIO

To listen to FM radio:

•Press the INPUT button repeatedly to select FM mode. The ‘FM’ mode indicator will light, the radio will play and the display will show the tuned frequency.

After a few seconds, the display will revert to show the time unless you change any FM settings, for example, re-tuning.

To auto-tune to FM stations

•Press and hold the }/SET+ or {/SET- button to auto-tune up or down the band.

The radio will search in the direction indicated and the tuning frequency will be displayed whilst searching.

When a usable station is detected the radio will stop tuning and play the station.

To manually tune to FM stations

•Press the }/SET+ or {/SET- button briefly to tune the band manually in 50kHz steps.

STEREO/MONO RECEPTION

When receiving a strong, good quality, FM stereo signal your radio will switch automatically to stereo reception.

The FM stereo symbol will be displayed.

When receiving weaker or FM mono signals, your radio will switch to mono reception.

The FM stereo symbol will not be displayed.

STATION PRESETS

Radio presets

Your radio can store up to 20 of your favourite stations as presets for quick recall.

To store a station as a preset

•Tune to the station you want to store as a preset.

•Press and hold the DISPLAY/MEMORY button.

The Preset Store display will appear (P- followed by a flashing number).

•Press the }/SET+ or {/SET- button if you want to choose a different preset number to store the station.

•To store the preset, press the DISPLAY/MEMORY button.

NOTE: If a preset is not stored within 5 seconds, the radio will revert to normal operation.

To recall any preset 1-20

•Press the PRESET button repeatedly to step through the

preset stations stored.

When you stop browsing through the presets, the display will change briefly to show the station frequency before returning to display the time.

8