ADVANCED OPERATION

RADIO FUNCTION:

Select the Radio function from the application menu at the bottom of the screen.

The radio screen will be displayed.

1.Scroll here to tune the radio (108.0 MHz shown in this example)

2.Touch here to store a station preset

3.Touch here to scan for a station

4.Scroll here to change the radio volume

5.Touch to select a radio preset

You can now operate many functions of your clock radio from the iPhone screen, tuning for stations and storing presets. In addition, you can assign the presets names for easier selection.

Auto tuning/preset storing:

•Touch the AUTO icon to scan for stations and store any stations found in the application preset locations.

NOTE: The presets stored by the application are separate and additional to those stored from the control panel.

Manual tuning:

•Scroll the frequency wheel to manually tune a station. The upper half of the wheel sets tuning in 1MHz steps, the lower half in 0.1MHz steps.

For example, to tune 105.5MHz, set the upper wheel to 105, the lower wheel to 5.

Both the iPhone display and the clock radio display will tune.

Storing a station as a preset:

NOTE: If you know the station frequencies of your favourite stations, you can enter the frequencies into the application and store them as presets before docking your iPhone.

•Tune to the station you want to store.

•Touch the SAVE icon.

•Choose a preset number to store this station (touch the M1, M2.... etc icon).

The station will be stored.

NOTE: You can scroll the preset bar to reveal more preset numbers (up to 20) if required.

Naming preset stations:

You can name preset stations stored on your iPhone.

•Touch the text box below the preset number you want to rename.

The text entry keypad will appear.

•Enter the preset name.

APPLICATION SETTINGS:

From the Application setting screen you can choose the following settings -

Flash colon: Set to ‘ON’ for a flashing colon on the clock display.

Brightness: Set the display brightness for the application (useful to make the display dimmer when docked at night). 24 Hour Mode: Set the clock mode to your preference of 24 hour or 12 hour display.

Temperature unit: Choose to set the temperature display units to your preference of Centigrade or Fahrenheit. Auto-Lock:When set to ‘ON’ with the application running the iPhone will lock automatically after 1 minute of inactivity. When set to ‘OFF’ the iPhone will not lock while the application is running.

NOTE: When Auto-Lock is set to ‘OFF’ the iPhone display will stay permanently lit when the application is running.

Sure Alarm: If Sure Alarm is enabled, the alarms will still operate if Auto-Lock has locked the iPhone.

NOTE: Setting Sure Alarm ‘On’ is recommended if you plan to use the alarm functions in the Technika application.

15