USING THE ALARMS

Your clock radio has two alarms (Alarm 1 and Alarm 2). You can set either or both alarms to wake you at your preferred time and choose to wake up to the sound of a buzzer, radio, music from a USB drive/Memory card or music from an iPod.

Setting the alarm times:

Switch the unit off.
Press the ALARM SET button.
Alarm 1 and Alarm 2 indicators will be displayed.
Press the ] or [ button to highlight the alarm you want to set.
Press the OK /,button to confirm this choice.
The alarm setting screen will appear for the alarm you selected.

You can now set the alarm time, volume, repeat and wakeup mode. You can also set your preferred time for the Snooze function.

Press the M or N button to select the item you want to change.

Press the OK /,button to highlight that item.

Press the M or N button to change the item.

If you need to change more than one item on a line, press the ]or [button to select the next item to change.

To save changes on a menu line, press the OK /, button.

When you have finished setting this alarm, press the ALARM

SET button to set the other alarm or press the button to return to the clock display.

Setting the alarms to wake you:

You can set either or both alarms to wake you.

Press the ALARM 1 button to set Alarm 1 to wake you. The Alarm 1 banner will appear on the display screen when the alarm is set.

Press the ALARM 2 button to set Alarm 2 to wake you. The Alarm 2 banner will appear on the display screen when the alarm is set.

Alarm 1 banner

Alarm 2 banner

IMPORTANT NOTES:

If you have chosen radio as wake-up mode, remember to tune to a station.

If you have chosen to play music from a USB drive or Memory card, check that this is loaded before going to bed.

If you have chosen iPod as wake-up mode, remember to dock your iPod, set to play music (not photos etc).

If the music source (iPod etc) is not found when the alarm sounds, the unit will automatically wake you with a buzzer.

WHEN THE ALARM WAKES YOU

The alarm will sound at your preset time and the Alarm banner will flash. You can then choose to set snooze, which will temporarily reset the alarm for a further period, or to switch it off.

NOTE: The duration of the Snooze period may be set when setting the alarm times.

To set snooze:

To set snooze, press the SNOOZE/DIMMER button when

the alarm sounds.

The alarm will stop sounding and the alarm indicator will flash. After the snooze delay, the alarm will sound again.

To switch off the alarm:

To switch off the alarm, press the OFF button. The alarm wikll stop sounding.

ALARM REPEAT

The alarm(s) will sound at the same time each day when set.

BACKUP BATTERIES

Fitting backup batteries are highly recommended. When backup batteries are fitted, clock and alarm settings will be retained during a power cut. If the power cut persists through the alarm time, a backup alarm buzzer, powered by the backup batteries will sound at a low level when the alarm time is reached.

17