}
[
]
{
pqtu
.
uII

k
Page 10
PLAYING AN AUDIO CD
Load an Audio CD into the player. The player reads the disc. Most CDs will start
automatically - a very few won’t.
CD Display
1) To play an entire disc from the beginning when it is stopped:
• Press PLAY uII (or OK)
2) To change tracks when a disc is playing
• Press }{to go forward/back one track at a time
When you reach the nal track you cannot go to the rst track using }.
• Press { to go back through the tracks.
3) Forward and Reverse Search
• Press [] repeatedly: The speed cycles 2X 4X 8X 16X Normal
• Press PLAY uII (or OK) or cycle to Normal Speed to resume normal play.
4) Pausing a disc
• Press II or uII on the player.
• Press PLAY uII (or OK) to resume normal play.
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
Music Playing
00:04:07
2 / 20 Track02:CDA
Current Track /
Total Tracks
Time played on track
REPEAT PLAY
Pressing REPEAT will:
A: Repeat a Chapter continuously
B: Repeat a Title continuously
C: Repeat thr Disc continuously
D: Cancel REPEAT
REPEATING A CHOSEN PASSAGE (A-B Repeat)
• Press A-B at the start of the selection (point A)
• Press A-B at the end of the selection (point B)
The disc will repeat the passage continuously
• Press A-B to return to normal play
LAST MEMORY
To enable Last Memory:
• At the desired place, press STOP .
Do not press STOP a second time, or switch the player o or load a dierent disc
otherwise the player will lose its settings!
• Open the player disc compartment. Remove the disc.
• Re-load the disc.
The disc will load and play from the point where you stopped. The words “Last
Memory” will briey appear on the screen.
To use this facility “Last Memory” must be enabled in the System Settings
Menu - see Page17
Repeat Disc
Repeat O
Repeat Title
Repeat Chapter
Last Memory
Rep A–
Rep A– B
Rep AB O
Stop