teac english manual 37.pdf 24/03/2009 16:25:27
USING WITH SKY DIGITAL
You may wish to use your TV with Sky Digital.
There are a number of connection options, the best being connecting via SCART cable.
Connecting via SCART
1)Connect the SCART cable from the Sky Digital Box to SCART of the TV
2)Press [SOURCE]
3)Press [\/] or [/\] to select SCART
4)Press [OK]
The channel your Sky Digital box is displaying will now be shown on the TV.
You may wish to share your Sky Digital signal around the home by using an RF connection. If this TV is to be connected in this way, please follow the below.
Connecting via RF
Ensure the Sky signal is switched on, before you start the below.
1)Connect the RF cable from the RF output socket of the sky/cable box to the ‘RF IN’ of the TV.
2)Switch the TV into analogue TV mode
3)Press [MENU] to enter menu.
4)Press [>] twice to select Tuning Settings Menu
5)Press [\/] to select Manual Tuning
6)Press [>] to enter Auto tuning
7)Press [OK] to start tuning
Once tuning is complete the first channel will appear. Press [CH+] to move through the channel until you find the Sky channel. The channel can be moved to an alternative position if you wish, please refer to the Program Edit section of the manual.
42
