LISTENING TO DAB RADIO

SELECTING DAB RADIO OPERATION

To select DAB radio operation:

Press the DAB/FM/AUX button repeatedly until‘Welcome to Digital Radio’ is displayed.

After a few seconds, the radio will tune to the last-used station.

When DAB radio is used for the first time:

The system scans all usable stations (full scan) and stores them alphanumerically -1 Radio, 2 Radio, AA Radio, AB Radio... The initial scan will take a few minutes and a progress bar will be displayed with the number of services found.

Number of services foundAfter the scan, the clock will be set, and the system will begin playing.

Note: If no stations are found after the scan, it may be that the signal in your current location is too weak. If this happens, switch the system off and move it to a location with a stronger signal. Repeat the scan process in the new location.

The stations found will be stored in an alphanumeric list.

SELECTING A STATION

TO SELECT ANOTHER STATION

Press the } or { button to browse the list of stations on the display.

When you find the station name you want to listen to, press the SELECT/MONO/ST. button.

The radio will re-tune to the station displayed.FM RADIO

To change to the FM band:

Press the DAB/FM/AUX button repeatedly until ‘Radio Initialize Please Wait’ is displayed.

After a short delay, the system will tune to FM radio.

To manually tune to FM stations

Press the }or {button repeatedly to tune up or down the band one frequency step at a time.

To auto-tune to FM stations

Press and hold the }or {button to tune to the next or previous station in the band.

Tuning will stop automatically when the station is reached.

STATION PRESETS

DAB and FM presets

Your radio can store up to 30 of your favourite stations as presets on both the DAB and FM bands for quick recall.

To store a preset

Tune to the station you want to store as a preset.

From the remote control, press and hold the ID3/MEM./ C-ADJ.button until the preset store display shows with the preset number flashing.

Press the } or { button repeatedly until the preset location you want to store is displayed.

Press the ID3/MEM./C-ADJ.button to store the station in this preset number location.

The display will confirm that the station has been stored in this preset number.

To recall a preset

Press the ID3/MEM./C-ADJ.button. The display will switch to show presets.

Press the }or {button repeatedly until the preset you want to play is displayed.

Press the ID3/MEM./C-ADJ.button to recall the station in this preset number location.

After a short delay the radio will re-tune to the selected preset.

7