8 Troubleshooting guide
Problem | Possible cause | Solution |
|
|
|
No reception on any | Short circuit in LNB | Remove each cable individually, until |
polarisation plane |
| green LED remains on. |
> green LED blinking |
| Fix short circuit cable section |
|
|
|
No reception on any | Antenna adjustment faulty | Check signal incoming to LNB. |
polarisation plane |
| Check that correct LOF setting is set |
> green LED on |
| at receiver. |
|
| Check power supply of LNB at 11/20. |
|
|
|
No reception or wrong | LNB connections mixed up, | Check allocation of cables and |
programme at specific | or core cable too short | connectors. |
polarisation planes |
| Check the LNB connection directly. |
|
| Note however that power is not |
|
| supplied to all outputs of quatro |
|
| LNBs |
|
|
|
Individual participant | LNB voltage and/or | See what happens if the receiver is |
outputs not working | switching criteria of the | connected to a different participant`s |
| receiver incorrect | output. Be sure to switch on the |
|
| receiver after connecting it, in order |
|
| to reset switching criteria. |
|
| Check LNB voltage and switching |
|
| criteria with a testing unit. |
Wavy lines in terrestrial TV picture
Input level too high
See technical specifications
Your equipment bears the
Subject to change and printing errors. Last revised 10/00.
TechniSat is a registered trademark of
TechniSat Digital GmbH
P.O. Box 560
www.technisat.de
460/99
11
