TechniSat GigaSwitch 9/8 installation instructions Technical Data

6 Technical Data

Terrestrial	47 - 862 MHz,	9/8	G	Cascade	9/8 G + K
Satellite band: 950 - 2150 MHz
		Terr.	Sat.	Terr.	Sat.
Throughput damping				2 ... 3dB	2 ... 5dB
Branch gain on 9/8K				1 ... 4dB	-2 ... +3dB
Branch gain on 9/8G		-3 ... -1dB	-2 ... +3dB	-5 ... -4dB 3)	-4 ... -2dB 3)
Decoupling receiver outputs			>	35dB
Input levels
recommended		72dBµV	70dBµV	70dBµV	75dBµV
maximum		80dBµV 1)	85dBµV 2)	80dBµV 1)	90dBµV 2)
Shielding		in acc. with EN50083		-2/A1 (TechniSelect S)
Control		DiSEqC 1.0 or higher with Uss			>0,25V
		or Mini-DiSEqC or 11,5V...14V/16V			...19V
			und 0/22kHz ±4kHz
Mains adapter		Mains adapter	supplied,	16V~, at full load	0,7A, stand-
			by	<25mA
Power, requirements of mains		65mA		190mA
adapter
max. possible to the		635mA		510mA
		(protected against short circuit		(protected against short circuit and
LNCs
		and overload)		overload)
required by receiver			60mA
Ambient temperature			-25...+55°C
Dimensions: WxHxD			210x125x35 (mm)

1)Relative to broad-band cable signal in BBC grid (36 TV signals, 24 FM programmes), CTB (72dB) / CSO (69dB), in case of terrestrial reception individual stations are often larger, but this is acceptable as long as they remain smaller than 90dBµV

2)in accordance with EN 50083-3: IMA3 35dB

3)In case of split cascading please also consider cable attenuation!

7