TechniSat GigaSwitch 9/8 Troubleshooting guide Problem Possible causes Solution

Distribution of terrestrial programmes:

>Ensure that the terrestrial signals fed into the system are of approximately equal strength.

>A terrestrial pre-amplifer is not required.

5 Troubleshooting guide

Problem	Possible causes	Solution
No reception on any pola-	Antenna position not cor-	Check the position of your
risation plane.	rect	antenna. Use the signal
		strength indicator of your
		receiver (transponder info)
Still no reception on any	Short circuit in LNC	Disconnect the branch
polarisation plane	connection	connections on after the
		other to locate the short
		circuit
No reception, or wrong	LNC connections swit-	Check on the allocation of
programmes, on individual	ched, or central wire in	cables and connectorsr.
polarisation planes	connection too short	E.g. use a receiver to
		check on the signal direct-
		ly in the LNC connection.
Outputs of individual par-	LNC voltage and/or swit-	Try connecting the recei-
ties not functional	ching criteria of receiver	ving unit to a different
	incorrect	party output.
		Check the LNC power and
		the switching criteria with a
		measuring device, or try
		another receiving unit
No reception via receivers	attachedLNCsntot feeding in	Set switch on 9/8 G to
cascade unit.		“Off” for energy saving
Waves in terrestrial TV	Input signal too strong	Reduce level
image		(see Technical Data)

6