I.Oil Fill Cap/Dipstick
If your engine has an oil fill cap/dipstick go to step 1. If your engine does NOT have an oil fill cap/dipstick, see "II. Oil Fill Cap/Plug" instructions on page 20.
1.Carefully disconnect spark plug wire and keep it away from spark plug. See Figures 38 and 39. See "G. Avoid Accidental Starts" instructions on page 2. Afterward, continue reading instructions below.
•Keep the disconnected spark plug wire securely away from metal parts where arcing could occur.
•Carefully attach the spark plug wire to the grounding post, if provided.
2.Be sure fuel fill cap is on and tightened securely. See Figure 40. See Figure 14 on page 7. Afterward, continue reading instructions below.
File was named:
3. Be sure you find the correct oil drain plug location, if |
present (see equipment manufacturer’s instructions). |
See Figure 41. See Figure 14 on page 7. Afterward, |
continue reading instructions below. |
4. Clean area around oil drain plug. |
1.Oil Fill Cap/Dipstick
2.Oil Fill cap/Plug
3.Oil Drain Plug
Figure 41. Oil Fill/Drain Locations
Page 18 |