Thank you for buying a Tefal kettle. Read the following instructions carefully, common to all our models, and keep them in a safe place.

Use

1Open the lid: while pressing on the locking system (depending on model), pull from the front towards the rear.

To close, press the lid down firmly.

Only boil water in the kettle.

Do not open the lid when water is at boiling temperature.

2Remove all packaging, stickers or other accessories from the inside and outside of the kettle.

3Adjust the length of the cord by winding it under the base. Wedge the cord in the slot.

4Place the base on a smooth surface which is clean and cool.

Place the kettle and its base towards the back of the working surface.

Do not place the kettle on or near surfaces which are slippery or hot and do not let the cord hang over a source of heat (hot plates, gas cookers). Keep away from children.

The kettle must only be used with its original base.

5Fill the kettle with the required amount of water.

You can fill the kettle through the spout to keep the filter in good condition.

At the very least, cover the heating element (or the bottom of the kettle) with water.

Never fill the kettle when it is on its base.

Do not fill it above the max. level or below the min. level. If the kettle is overfilled, boiling water may escape.

Do not use without water.

Check that the lid is closed properly to avoid steam near the handle.

6Place the kettle on its base. Connect to the mains.

Check that the electrical supply is compatible with the power and voltage indicated beneath your model.

Only plug the kettle into a socket with a built-in earth connection.

Never lift the lid whilst the water is boiling.

7Turn it on using the switch or the trigger handle. The kettle will turn itself off automatically when the water is boiling.

8Using the variable temperature selector found on the VitesseS kettle, you can choose the water temperature according to your needs: from boiling, using the setting, to the ideal temperature for immediately sipping ready-made drinks, using the setting.

The temperature selector part of the appliance lights up when in operation and the kettle stops automatically as soon as the preselected temperature level is reached.

9Check that the kettle has stopped automatically or turn it off manually before removing it from the base to pour the water.

GB

The kettle must only be used with its original antiscale filter.

Page 7
Image 7
Tefal BE312010, BE312013 manual Use, To close, press the lid down firmly, Fill the kettle with the required amount of water