BEFORE USING FOR THE FIRST TIME | EN |
Before using for the first time wash all accessories (D, E, F, G) in warm water and a little washing- up liquid but not the motor unit (A).
WARNING: The cutter blades are extremely sharp, handle them with precaution during use, cleaning or on emptying the bowls.
Make sure that all packaging has been removed before operating the appliance.
Important: Make sure that the motor unit has come to a complete stop, with buttons (B) and
(C)released before fitting the blender assembly or accessories to the motor unit.
Never operate the appliance if the lid fitted (D6) with the seal (D5) has not been placed on the assembled bowl (D).
USING YOUR APPLIANCE
Using the Blender
Make sure that the seal is fitted and correctly positioned on the blade unit (D1):
the folds of the seal should be visible when it is in place and the seal should be flat, it should not be buckled (fig1).
With the “click” button (D2) of the blade unit (D1) facing you, position the base of the bowl (D4) under the ridge (D3) (fig 2a) then bring the blade unit back (D1) towards the bowl (fig 2b) until it locks, pressing on the top of the click button (D2) to ensure that the bowl (D4) and the blade unit (D1) are fitted together correctly (fig 2c).
Add the ingredients into the bowl without exceeding the maximum level indicated: of 0.6 L for thick preparations
and 0.5 L for liquid preparations
Do not put any liquid or ingredients whose temperature exceeds 60° C (140°F) in the mixer bowl.
Fit the lid seal (D5) around the lid (D6) place the lid assembly on the bowl (D4), lock the cap (D7) in its housing located on the lid.
Fit the assembled bowl (D) to the motor unit (A) with the click button (D2) of the blade unit lined up with the notch located in front of the motor unit (A) (fig3). Note: If the bowl (D) is not far enough down on the motor unit (A) the appliance will not work (fig4).
Plug in the appliance and press button 1 (C) or 2(B), depending on the required speed, pressing several times or holding the button down for continuous operation. Do not use for more than 60 seconds in continuous operation.
To stop the appliance, release the pressure on button (B) or (C). Unplug the appliance. Remove the bowl (D) from the motor unit (A).
Using the Herb Mill or Spice Mill
The herb mill (E) allows you, in a few seconds, to chop ingredients such as: parsley, onions, garlic, dried apricots, meat (without sinews or gristle and cut into pieces), to make breadcrumbs (rusk, etc.).
Do not use the herb mill for liquid preparations (fruit juice).
The spice mill (F) allows you, in a few seconds, to reduce different spices to a powder (coriander seeds, peppercorns) and dried aromatic plant leaves (mint).
These accessories come with a bowl that does not allow access to the blades during use.
Make sure that the seal is fitted and correctly positioned on the blade unit (E1) or (F1) (fig1), the folds of the seal should be visible when it is in place and the seal should be flat, it should not be buckled (fig1).
7
