Tefal FV5105E0 manual Λλλ

1800117037 FVZ E0 10/07/09 10:53 PAGE 115

Setting the steam level

-In order to avoid water dripping from the iron onto the linen:

•Turn off the steam when ironing silk or synthetic fabrics.

•Set it at the minimum position for wool.

What temperature and which steam setting to use ?

-Set the thermostat control (D) referring to the table below.

-The thermostat light comes on. It will go out when the soleplate is hot enough (E).

FABRIC	POSITION OF	STEAM SETTING
	THERMOSTAT CURSOR		POSITION
LINEN	MAX
COTTON	λλλ
WOOL	λλ
SILK	λ
SYNTHETIC	λ
Polyester, Acetate, Acry-
lic, Nylon
				= STEAM ZONE

RECOMMANDATIONS:

Fabrics and ironing temperatures:

•Your iron heats up quickly : so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher temperature,

•If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again,

•when ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place eg (inside the hem).

Spray function

-Whether steam or dry ironing, you are able to use the spray button (F) to dampen laundry to remove stubborn creases.

-Make sure that there is water in the tank before using this button.

For more steam

-Press the Shot of Steam button from time to time (G)

-Wait a few seconds between each shot before pressing the button again.

Vertical steam ironing

-Hang the garment on a hanger and hold the fabric slightly taut with one hand.

The steam is very hot, so you should always do this with the garment on a hanger – never while someone is wearing it.

-Set the thermostat control to MAX (H).

-Press the Shot of Steam button () repeatedly (I), moving the iron from top to bottom (See illustration) (J), wait a couple of seconds between each use of the button.

-Hold the iron a few centimetres from the fabric to avoid burning delicate

fabrics.ENG