Position your pressure cooker so that the programme selector is facing you.

Never force the pressure cooker open, make sure the pressure indicator

(D)is down in the normal position.

First use EN

•Clip the trivet (I) to the steaming basket (H*) - Fig.

5 - 6.

•Place the steaming basket (H*) at the bottom of the cooker (N) - Fig. 7.

•Fill two thirds of the cooker with water (M) - Fig.

4.

•Close your pressure cooker - Fig. 2.

•Move the programme selector to - Fig. 11. •Setthetimerfor20min.Placeyourpressurecooker on a heat source set to maximum power.

•When steam starts to be released through the valve, the timer beeps, reduce the heat source. •After 20 minutes, press the + or - keys to stop the timer beeping. Then turn off the heat.

•Move the programme selector to - Fig. 8. •Whenthepressureindicator(D)lowers,thepressure cooker is no longer pressurized.

•Open the pressure cooker - Fig. 1. •Clean it.

Use

Before cooking

•Everytimeyouuseyourcooker,firstcheckthat

the control module is correctly fitted and

 

tightened (using a coin) and check that the

 

operating valve (P) located inside the lid can

 

move by moving the programme selector to

 

and pressing the decompression valve

 

with your finger.

 

•Visually check that the steam release outlet (A)

 

is not obstructed - Fig. 14.

 

•Alsocheckthatthesafetyvalve(Q)canmovesee

Operating valve

- Fig. 16 and refer to the "Cleaning and

 

Maintenance"heading.

 

•Determine the necessary amount of water for

 

cooking, see "Minimum and maximum fill"

 

section.

 

•Close your pressure cooker.

 

* depending on model

9