your

pts no

wipe

ound

o not

d. ch as

r on a

ource

Tef-SNAKnCLEAN-2100072598 18/09/12 09:22 Page47

•Do not place cooking utensils on the cooking surfaces of the appliance. •Never cut food directly on the plates.

•Do not use metal scourers or scouring powders to avoid damaging the cooking surface (e.g.: non-stick coating, ...).

•Never leave the appliance to heat in a vertical position.

•Never plug the appliance without the plates and covers are correctly positioned.

Advice / information

•Foryoursafety,thisapplianceconformstoallapplicablestandardsandregulations(LowVoltageDirective,Electromagnetic Compatibility, Food Compliant Materials, Environment, …).

•first use, there may be a slight odour and a little smoke. This is normal and will quickly disappear. •Thank you for buying this appliance, which is intended for domestic use only.

Instructions for use

Exploded view of the appliance at the end of this leaflet.

EN

•Place your appliance on a flat, stable and heat-resistant surface.

Before you use your appliance for the first time •Fully unwind the power cord.

•Lift the latch - A - to open the appliance .

•Toremovetheplates,pressthe"EJECT"buttons- 4- locatedonthefrontoftheupperandlowercovers.-C-D-E. •To refit the plates, place the plate at an angle and press down to lock it in place - F - G - H.

•The plates used for making waffles and for grilling are not interchangeable. Line up the mark 1 on the plate with the mark 1 on the cover, inside the appliance and the mark 2 on the other plate with the mark 2 on the other cover - G.

•Onfirstuse,washtheplates(followparagraphCleaning),pouralittlecookingoilontotheplatesandwipewith a soft cloth.

•Always make sure that the appliance is cold and unplugged from the power outlet before changing the plates.

Using the appliance

•Ensure that the plates and covers are stable, well positioned and correctly clipped to the appliance. •Close the appliance.

•Check that the switch is in "0" position.

•Connect the cord into the mains. Turn on the switch I (position 1). The red light will light up - I.

•Leave the appliance to pre-heat: the green light goes out when the correct cooking temperature is reached - J. •Open the appliance and place the prepared food to be cooked on the plates - L.

•Close the appliance.

•Leave the food to cook for the desired time.

•The green light goes out and lights up again regularly during the cooking process, this is normal.

•When cooking is complete, switch off the appliance by pressing "0". Unplug the electrical cord from the wall socket - N - O.

•Let the appliance cool down (approximately 2 hours).

Using the timer to control the cooking time

•The button situated on the right side of the screen enables you:

-to set the time by pressing and holding down the button or by pressing the button quickly several times. A small "5" displays at the top and on the right side to indicate the half minutes;

-to manually stop the warning signal by pressing a few seconds.

•Whenthecookingtimeisfinished,thetimergivesawarningsignalandstopsautomaticallyaftertwoseriesof ringing.

•The timer indicates the end of cooking time but does not turn the appliance off.

47