61401134/329 ingles 18/7/03 16:57 Página 25
•Check that the controls are in the correct position.
•Open the mains connection gas tap or the gas bottle cock.
•Press the burner control.
•While keeping the burner control pressed, turn it as far as it will go until the gas igni- tes. Keep pressed for 5 to 10 seconds, in order to permit the safety thermocouple to be activated.
•Turn the control to the desired position.
•Set the control knob to the desired posi- tion.
A
B
C
D
F 
E
The ignition unit (ceramic and electrode) must be carefully cleaned at regular intervals in order to prevent ignition problems. Also check that the burner apertures are not obs-
A Burner indicator B Setting indicator C Off setting
Drawging 22
tructed.
A
B
Drawing 21 C | D |
ABurner pilot lamp
BControl off position
CMaximum gas position
DMinimum gas position
Follow the instructions below in order to ope- rate a CGC 4G AI AL hob: (See drawing 22).
•Check that the control knobs are in the appropriate position.
•Open the gas flow key or the gas cylinder key.
•Press the control knob and turn it at the same time in
D Minimum gas setting
E Maximum gas setting
F On burner setting
For safety reasons we recommend that the gas supply tap should be turned off when the cooker is not in use, in accordance with gas supply company instructions.
If you smell gas, turn off the hob’s gas supply tap and ventilate the room. The gas installa- tion and the hob must be checked by a specia- lized technician.
Warning:
To avoid the risk of burns, keep children away from the hob during or after its operation.
Use flat bottomed pans and check that they are placed correctly on the pan support, in order to prevent pans from sliding when their contents star t to boil (do not use pans with concave or convex bases).
Hob models
25
