![](/images/new-backgrounds/1210412/21041259x1.webp)
GB If something doesn’t work
Before calling the Technical Service, please make the following checks:
Fault | Possible cause | Possible solution |
Neither the hotplates nor the pilot lights are working |
| |
|
|
|
| The cable is not | Connect the cable |
| connected to the mains | to the mains |
There is no spark when the |
| |
automatic ignition control is pressed |
| |
| There is no current | Check/repair the |
| at the plug | electricity at the mains |
|
|
|
There is a spark but the burner is not igniting |
| |
|
|
|
| The spark plug and the part | Clean the end of the |
| of the burner where the | spark plug and the |
| spark should be is soiled or | burner |
| greasy |
|
|
|
|
Do not light the gas burners |
| |
|
|
|
| Gas is not coming through | Check that the gas |
| cylinder tap is properly | |
| to the hob | open |
|
|
|
|
| If it is piped gas, open |
|
| the gas tap |
|
|
|
The burner ignites but, when you stop holding down the knob | ||
that activates the safety feature, it goes out again |
| |
| The flame is not appearing | Clean the burner’s |
| in the area heated by the | openings |
| thermocouple |
|
|
|
|
The gas burners are making the pans dirty |
| |
|
|
|
| The burner openings | Clean the burners’ |
| are dirty | openings |
|
|
|
| The injector or | Clean the injector holder |
| and injector without using | |
| injector holder is dirty | |
| anything which could | |
|
| |
|
| damage or alter the |
|
| diameter of the gas outlet |
|
| opening |
30