JA Audio 9902S manual Main Menu, When your antenna is controlled by a motor

MAIN MENU

•Adjust the antenna towards the new satellite. Look at the Sig- nal strength (AGC) and Signal quality (SNR) bar indications to check the levels. Please note: In this case, (a brand-new sat- ellite), you do not get a TV picture in the background on the screen, even when the SNR indication is good! When both indication bars (AGC and SNR) are good:

•Press the BACK button until you return to the ”System con- figuration” menu.

•Select ”Channel search”.

•Select “Manual” or “Advanced” search.

•Select the new satellite name.

•Enter the settings for Transponder frequency, Polarization etc. for the new satellite.

•Press OK to start the channel search procedure in order to download channels from the new satellite.

•When you get the message on the screen that ”you have found X new TV-channels and X new radio channels”, press OK to save the new channels.

The new channels will be saved in the channel list they belong to.

At the same time as you save the new channels, also the settings for the new satellite will be saved.

When your antenna is controlled by a motor:

•Enter the “Channel search” menu.

•Select “Manual” or “Advanced” search.

•Select the new satellite name.

•Enter the settings for Transponder frequency, Polarization etc. for the new satellite.

•Select the last line, “Adjust motor”, from where you now, by

pressing the buttons on the remote control, can move the an- tenna to the position for the new satellite.

Look at the Signal strength (AGC) and Signal quality (SNR) bar indications to check the levels. Please note: In this case, (a brand-new satellite), you do not get a TV picture in the back- ground on the screen, even when the SNR indication is good! When both indication bars (AGC and SNR) are good:

•Press OK to start the channel search procedure in order to download channels from the new satellite.

•When you get the message on the screen that ”you have found X new TV-channels and X new radio channels”, press OK to save the new channels.

The new channels will be saved in the channel list they belong to.

The position of the new satellite will be added to the prepro- grammed satellite positions in the antenna motor.

GB 46