Remote Control, Pad, + P | JA Audio 9902S manual

REMOTE CONTROL

This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel.

Switch the Mediamaster in and out of standby mode.

EXIT TV Return to the viewing mode from a menu without storing any settings (in menu mode).

Switch between TV or Radio mode (in viewing mode).

	Turn the sound off/on (mute).
- +	Adjust the volume of digital programmes.
	The Mediamaster’s maximum level is controlled by the TV’s
	present volume setting.
0 - 9	Change channel and to select individual menu options.
	Note: If 0 is entered as the first digit, the TV Release func-
	tionality is activated (see below).
0	TV Release. To switch between digital TV/Radio, analogue
	TV and analogue satellite TV and VCR, when your systems
	are connected by SCART cables.
	Info. To display short and extended information (if transmit-
	ted) about current and next programmes.
BACK	Go back one level at the time within menus without storing
	any settings.
pad	Personal Active Disc. Call up (and hide) the recording menu
	on the screen. For recording to the built in hard disk.
MENU	To show and to exit from the Main Menu.
GUIDE	Obtain a list of present and following programmes for the
	available channels. This information is only shown if your
	Service Provider transmits programme information (EPG in-
	formation).
P+ P-	Change channels up and down, one at the time.
	Return to TV mode from an “Open TV” application.
	Change page in a menu/list/text if more than one page is
	available. To browse through teletext history.

▲▼ Move up/down in the menus and to change channels.

Change settings in menus.

OK Confirm choices and selection of a highlighted item.

Show the TV/Radio channel list.

(Red) Download an “Open TV” application.

OPTION (Green) Select service options in viewing mode.

OPTION + code will open locked channels.

TEXT (Yellow) Select teletext information.

Press to enter teletext (if available).

(Blue) To toggle between present and previous TV/Radio channel.

GB 5

Image 5

JA Audio 9902S manual Remote Control, Pad, + P

Contents

Mediamaster Page Mediamaster 9902 S Contents General Information about the Mediamaster For Your SafetyImportant Information in the Event of Service + P Remote ControlPad Rear panel Front and Rear PanelFront panel Only for services coded with the Viaccess CA system Viaccess smartcardAbout the Smartcard and CA Module CA module with its smartcard Connecting the Mediamaster to the dish Installation of the MediamasterPreparing the remote control Connecting a TV and VCR Connecting to the TVGeneral If your TV has a Scart socket, but your VCR does not Connecting to the built in phone modem Connecting an analogue satellite receiver and a VCRConnecting a HiFi system Tuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used General information First Time InstallationWelcome menu Language Alternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Line 1 through 4 on the antenna satel- lite selection menu Antenna adjustment and signal check Line 5 and 6 on the antenna satellite selection menu Connection of a two port DiSEqC switch Multisatellite/mini DiSEqC One antenna/one LNB configurationLine 7 on the antenna satellite selection Menu Multisatellite/two port DiSEqC Multisatellite/four port DiSEqC Connection of a four port DiSEqC switchChannel search Automatic search Advanced search Motor antennaManual search Press OK Adjust motorType of motor First Time Installation Channel search progress Time adjustmentFinishing the first time installation Programme information Viewing Mode Guide I information button Options green button List of TV and radio channelsAudio language Subtitle language Text button teletext TV release Recording from the hard disk to a video recorder Recording on an external analogue Video recorder About hard disk recording Hard Disk Recording Locked functions during recording Different ways of making recordingsRecording menu To watch the pause recording Pause Recording To finish this example of a pause recording Normal recording Timer recording Pause function To start playback of a recordingHandle Recording menu appears Pause during playback of a normal recording Fast Forward and Rewind of a pause recording in progress Watch the playback at a different speed Slow Motion function Small steps during playbackFind a specific position within a playback Edit function Play List of recordingsHandle recording Erase RenameAdd another recording Recording information Save a recording as Erasable or Permanent TV and radio channels Main MenuEdit channels Important about editing channels Create list How to give a specific nameRename list Rearrange lists Rename channels Select channelsLock channels Delete channels Rearrange channelsRemove channels To remove channels Update channels via a PC Update channels Edit satellites System configurationTo add a new satellite For a fixed antenna When your antenna is controlled by a motor TV settings Antenna/Satellite configuration Modem Setting Reinstall Receiver upgradeErase hard disk Information about the modem Parental control Language preferences Appearance preferences Make new recordings Recording preferencesSaved pause recordings Repeat playing Type of programme Erase before record hours System information Receiver numberFollowing extreme example System information Viaccess embedded Conditional AccessDiagnostics Release info Common Interface CI Smartcard settingsTimer Timer setup Important information related to the timer recording AGC Glossary of Terms Problem Possible causes What to do Problem Solving Front Panel Display What to do if you can’t solve the problem Security information Technical Specifications 0226