JA Audio 9902S manual Front And Rear Panel, Front panel, Rear panel

FRONT AND REAR PANEL

Front panel

Button

Push the button to release an inserted CA module

Display

shows channel number, error messages, remote control commands and time in standby mode

Slot	Slot
for a Viaccess	for a CA module
Smartcard	with a Smartcard

to put the Mediamaster in and out of standby mode

to move up/down in the menus and to change channels.

Rear panel

DIGITAL AUDIO phono connector S/PDIF digital out- put for connection to a HiFi system

AUX SCART	TELEPHONE *	TV/VCR	ANTENNA * *
for connection to a VCR,	for connection	for an RF-cable to the	Satellite dish
or an analogue satellite	of a modem	aerial input of the TV or	input (F-connec-
receiver	cable to the	VCR	tor)
	phone jack

Mains lead	AUDIO L R	TV SCART	SERIAL PORT	TV AERIAL
95-250 V AC	phono connectors	for connection	to read and load	for a terrestrial (con-
50-60 Hz	Stereo outputs for	to the TV	data information	ventional) TV aerial
	connection to a HiFi
	system

*The modem function is only valid in Scandinavia.

GB 6

**The LNB cable also feeds the LNB with a supply volt- age of 13/18 V (V/H polarisation) and a 0/22 kHz sig- nal (bandswitch). Max LNB current is 500 mA.