JA Audio 9902S manual Technical Specifications, Security information

TECHNICAL SPECIFICATIONS

Transmission standards			Telephone (return channel on the phone line)
		DVB, MPEG 2	Contact				modular 6-pin jack
LNB / Tuner input			Protocol				V22, 1200 bits/sec
			Security information
Connector		1x F-type (LNB)
			The modem connection is made according to the TNV 3 circuit
RF input frequency		950-2150 MHz
			type. All other connections are made according to the SELV
RF input power level		-25 to -65 dBm
			circuit type.
Supply voltage		13 /18 V ± 5%
Max. current		500 mA, overload protected Conditional Access system
Control voltage		22 kHz, 0,65 Vpp	Embedded Viaccess. One PCMCIA interface for a Common
			Interface CA module (DVB Standard)
DiSEqC		Tone burst A/B or
			Smartcard Interface
		Level 1.2
RF impedance		75 Ω	Interface for one card according to ISO 7816
RF modulator			Supports embedded Viaccess descrambler.
			Front panel
In/out connector		IEC female / IEC male
			4x7 segment numeric LED display, Buttons:								,
Modulator frequency		470 to 862 MHz
			(standby, progr. number up and down)
Output level		70 ± 5dBV
			Other data
Output channel		21-69
			The model code, variant and serial number, are located on a
Preset channel		43
			label on the underside of the housing.
Output signal		PAL B/G orPAL I
TV SCART			Hard disk					40 Gigabyte
		1 Vpp (± 1 dB) / 75 Ω	Supply voltage				95-250 V AC, 50-60 Hz
Video output
			Power consumption max				27 W at 500 mA LNB load
Audio output		0,5 Vrms / RL >10 kΩ
			Power consumption in
RGB output		Internal RGB or from
			standby				7,5 W
		AUX SCART
			Operating temperature					+5° C to +40° C
RGB bandwidth		5,8 MHz ± 3 dB
			Storage temperature					- 40° C to +65°			C
Fast blanking output		Internal or from
			Humidity					25 to 90 % rel humidity
		AUX SCART
			Operating distance for
Status output		0/6/12 V / RL 10 kΩ
			remote control				max 10 meters
AUX SCART		1 Vpp (± 1 dB) / 75 Ω	Dimensions (w x d x h)					380 x 240 x 69 mm
Video output			Weight				2,4 kg approx
Video input		1 V pp / 75 Ω	SCART sockets
Audio output		0,5 Vrms / RL >10 kΩ
Audio input		0,5 Vrms / RL >10 kΩ		TV		AUX
Status input		0/6/12 V / RL >10 kΩ	1	Audio out right ch.		Audio out right ch.
Fast blanking input		0/2 V for RGB, bypass to	2	-		Audio in right ch.
			3 Audio out left ch.			Audio out left ch.
		TV SCART
			4	Audio ground		Audio ground
RGB input		Yes
			5	RGB blue ground		RGB blue ground
DIGITAL AUDIO (S/PDIF)
			6	-		Audio in left ch.
Connector		1 x RCA	7	RGB blue signal out		RGB blue signal in
AUDIO R L			8	Switch voltage out		Switch voltage in
			9	RGB green ground		RGB green ground
Connector		2 x RCA (R+L)
			10	Connect to pin 10 in AUX scart
Output		0,5 Vrms ± 0,5 dB/ RL 10 kΩ
			11	RGB green signal out RGB green signal in
SERIAL (RS 232) serial data			12	-	-
Connector	9-pin D-sub male		13	RGB red ground		RGB red ground
Signals	RS232, max. 57600 bit/s		14	Fast blank. ground		Fast blank. ground
Pin 1 DCD	(Data carrier detect) not		15	RGB red signal out		RGB red signal in
	connected		16	Fast blanking out		Fast blanking in
2 RXD	(Receive data)		17	Video out ground		Video out ground
3 TXD	(Transmit data)		18	-		Video in ground
4 DTR	(Data terminal ready) Set to high		19	Video out		Video out
5 GND	(Signal ground)		20	-		Video in
6 DSR	(Data set ready) not connected		21	Ground (casing)		Ground (casing)
7 RTS	(Ready to send)			20					2
8 CTS	(Clear to send)
9 RI	(Ring indicator) not connected			21						1	GB 61