INSTALLATION OF THE MEDIAMASTER
General
There are many different types of TV/VCR and other equipment that you can connect to the Mediamaster.
In this manual you will see some of the most common ways to connect your equipment.
If you use RF cables you will have to tune your TV and VCR to the
Mediamaster output channel (see page 11).
If you have problems with your connections and need help, con- tact your dealer or Service Provider.
Connecting to the TV
• Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
• | Connect an RF cable from the TV/VCR output on the Media- |
|
| master to the RF input socket on the TV. |
|
• | Connect the TV aerial to the TV AERIAL input socket on the | RF |
| Mediamaster. | SCART |
Connecting a TV and VCR
Refer to your VCR’s manual for full instructions.
•Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
•Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster.
•Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV.
•Connect the TV aerial to the RF input socket on the VCR.
If your TV has a SCART socket, but your VCR does not
•Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
•Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the VCR.
•Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
VCR
RF SCART
Mediamaster
SCART
RF
VCR
RF
SCARTMediamaster
GB 9
