JA Audio 9902S Smartcard settings, Common Interface CI, Timer, Main Menu, Age rating control

MAIN MENU

Smartcard settings

Age rating control

This is an age rating control function which is connected to your smartcard. It will only affect the channels you have subscribed to. Choose “On” if you want to activate the age rating.

This means that you have to enter your smartcard PIN code to be able to watch the age rated channels. The age rating of each programme is controlled by your Service Provider.

Do not use this Age rating control if you are using the Age rat- ing control within the Parental control menu. See page 50.

Age limit

Select an age limit. Programmes transmitted with a lower limit age will not need the access code.

Change Smartcard code

In this menu you can change the code on your Smartcard.

Common Interface (CI)

These menus are provided by the CA module and its Smartcard.

Timer

General

You can program the Mediamaster to start and stop at a predefined time.

The function is very useful when you want to record a programme and you are unable to start/stop the recording event yourself. Or when you just want to be reminded of the start of a pro- gramme you do not want to miss.

A programme that already has been started by this Timer func- tion will lock the box. The display on the box will indicate “t x” (where x is the channel number) while you are watching a programme you have been reminded to watch. During a digital recording event the display will show “r E C”.

You can not change channels or call up a menu until the stop time is reached. However, you can interrupt the event (e.g. stop a re- cording) by pressing the MENU button (about 5-10 seconds) until a channel number appears in the display. Please note, that this is the only way to stop a recording that has started (apart from pulling the plug from the mains, which is not to recommend.)

GB 56