MAIN MENU
System configuration
You will be asked to enter your access code before you can en- ter this menu. The code is preset to 1234 from the factory. (The code can be changed from the Parental control menu. Re- fer to page 50.)
If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System con- figuration” menu.
Please note that many of these functions are the same as in the “First time installation.”
Channel search
The procedure is the same as performed during the First Time In- stallation. Please refer to page
Edit satellites
When a new satellite has been sent into orbit, or if you select a not preprogrammed satellite, you can add it to the existing sat- ellite list.
To add a new satellite
•Select the line “New satellite”.
•Press OK.
•Enter the name of the new satellite. (How to enter a name is described on page 41.)
•Enter the position (in degrees) with the numeric buttons on the remote control. (Use the left arrow button to erase digits.)
•Select orientation; East or West.
•Press OK to save these settings.
Before you can watch channels from that new satellite you must also carry out the following steps:
For a fixed antenna:
•Select “Antenna/Satellite configuration” in the “System con- figuration” menu.
•Follow the instructions on page 15. From the menu “Antenna adjustment” select the new satellite name.
GB 45
