Teka LP1 700 manual Adjusting salt consumption, Water Hardness

en

Adjusting salt consumption

The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and customize the level of salt consumption so that it remains at a minimum.

To adjust salt consumption, proceed as follows:

Unscrew the cap from the salt container;

There is a ring on the container with an arrow on it (see figure to the side),

If necessary, rotate the ring in an anticlockwise direction from the "-" setting towards the "+" sign, based on the hardness of the water being used.

It is recommended that adjustments be made in accordance with the following table:

	Water Hardness
	Clarke
Level			ºdH	mmol/l
	degrees
1	0-14	0-17		0-1,7
2	14-36	18-44		1,8-4,4
3	36-71	45-89		4,5-8,9
4	>71	>89		>8,9

Selector	Salt		Autonomy
	consumption
position			(cycles/2kg)
	(Grams/cycle)
/	0	/
"-"	20	60
Middle	40	40
"+"	60	25

9