Teka LP1 700 manual How to fill rinse aid, Rinse aid, Loading the rinse aid

How to fill rinse aid en

Rinse aid

This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door .

When the low rinse aid indicator “ 1 ” is bright, it means the rinse aid is low, you must load rinse aid .

1

Low

Full

Loading the rinse aid

Regardless of the type of detergent dispenser installed on your appliance, you must proceed as indicated below when loading the rinse aid.

To open the dispenser, turn the "2" cap in an anti-clockwise direction and then pour in the rinse aid, making sure not to overfill. The amount of rinse aid used for each cycle can be regulated by turning the " 3" dose adjustor, located beneath the "2" cap, with a screwdriver. There are 6 different settings; the normal dosage setting is 3.

2 3

Important

Proper dosage of the rinse aid improves drying.

If drops of water remain on the dishes or spotting occurs, the dosage ad- juster should be turned to a higher setting.

If the dishes have white streaks, turn the dosage adjuster to a lower setting.

10