Manual ND.qxd 12/01/2005 17:10 Page 15
Index
| Page |
|
|
Description of the appliance | 15 |
|
|
Instructions for use | 15 |
|
|
Programming timer | 15 |
|
|
Cleaning and maintenance | 16 |
|
|
Problem solving | 16 |
|
|
Sizes and specifications | 17 |
|
|
Accessories supplied | 18 |
|
|
Installation | 18 |
|
|
Active carbon filters | 18 |
Description of the appliance
AElectronic programmer control box with buttons to control speed, light and power in use indicators.
BMetal filters.
CLamp with two bulbs - 20 W
D, E Vertically adjustable tubecovers.
FDecorative part (Not incluided).
Instructions for use
Light |
Minimum speed |
Medium speed |
Maximum speed |
Extra fan |
Timer |
Switch on the extractor fan a few minutes before you start to cook in order to ensure that a steady air flow has been established before fumes appear.
Allow the extractor fan to run for several | ENG | |
minutes after you have finished cooking |
| |
(between 3 to 5 minutes) in order to expel all |
| |
the grease from the outlet duct. This prevents |
| |
the return of grease, smoke and smells. |
| |
|
|
|
| Programming timer |
|
1.- The draft hood will remain on for 10 minutes at the selected level if pressed at any speed for more than 2 seconds.
To programme a time other than the pre- selected one (10 minutes):
a).- Press the "Timer" button with the draft hood turned off.
b).- Select the intake time by pressing the corresponding button. (see figure).
c).- Press the "Timer" button again.
d).- Press the chosen speed for more than 2 seconds, and the light will begin to flash.
15
