English
Installation
To fix the extractor to the kitchen unit the pattern on fig. 4 is used.
The lower part of the extractor must be located at a minimum height of 60 cm above the hob for electric cookers and 65 cm for gas cookers. If the instructions of a gas cooker indicate a greater distance these must be observed.
When the extractor is working at the same time as other
To achieve optimum performance the length of the outlet hose should not exceedº 4 meters, or include more than two 90 angles (elbows)
Although venting to the outside is recommended, activated carbon filters may be used, which allow the gas to be returned to the kitchen through the outlet pipe.
IIf you wish to exchange the front for one matching the kitchen units, follow the following instructions (Fig. 5):
*Withdraw the movable group.
*Remove the screws (T) that support the front
I* Install the new front fixing it with the same
screws that held the old one.
If something does not work
Before seeking technical assistance carry out the following checks first:
