2.Using #10 x ¹⁄₂"
3.Turn the adjustment bolt for each bracket until the bolt touches the wall.
4.Turn the locking nut on the adjustment bolt to lock in position.
A
B
C
Complete Window Installation
1.Insert the foam window sash seal behind the top of the lower window sash and against the glass of the upper window.
2.Place one
3.Use a ³⁄₃₂" drill bit to drill a starter holes through the holes in each bracket into the window sash.
4.Attach both the
B
C
A A
A. Support bracket
B. Locking nut
C. Adjustment bolt
A. Window lock brackets
B. Upper window glass
C. Foam window sash seal
Through-the-Wall Cabinet Installation
NOTES:
■Handle the air conditioner gently.
■Be sure your air conditioner cabinet does not fall out of the opening during installation or removal.
■The location where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded
3 prong outlet.
■Do not block the louvers on the front panel.
■Do not block the louvers on the outside of the air conditioner.
■It is the customer's responsibility and obligation to have this product installed by a qualified technician familiar with
Option 2—Plastered wall with no molding
If the plastered wall is to be flush with the cabinet and no molding is used, the wood frame must be set ¹⁄₂" (13 mm) into the inside wall.
A B C
D
Option 1—Wood, metal or plastic molding
When using a wood, metal or plastic molding, the wood frame should line up with the inside wall as shown.
A B C
D
A. Molding | C. Wood frame |
B. Inside wall | D. Louvers |
A. Plastered wall | C. Wood frame |
B. Inside wall | D. Louvers |
Install Wood Frame
1.Construct the wood frame. See “Location Requirements” for dimensions.
2.Measure the outside width and height of the frame to determine the wall opening dimensions.
3.Cut the opening through the wall. Remove and save the insulation.
9