Attach Side Curtains

1.Locate the bag of screws provided.

2.Insert the top and then the bottom of the right-hand curtain housing in the top and bottom curtain guides on the air conditioner.

Top view

AB

A. Curtain housing

B. Curtain guides

Bottom view

A

B

A. Curtain housing

B. Curtain guides

3.Extend the right-hand curtain outward so you may insert the first screw through the middle hole of the curtain. Using #10 x ¹⁄₄" pan-head Phillips screw, screw the curtain to the middle hole in the air conditioner cabinet.

NOTE: This screw is required to correctly attach the curtain (top to bottom) to the air conditioner cabinet.

4.While the right-hand curtain is still extended, insert #10 x ¹⁄₄" pan-head Phillips screws into the top and bottom slots of curtain. Screw the curtain to the top and bottom holes in the air conditioner cabinet.

NOTE: Some curtains may have 2 slots at each end. You will be able to see a mounting hole through the correct slot.

5.Slide the curtain housing into the curtain guides as far as it will go.

6.Repeat the above steps for the left-hand curtain.

Attach foam adhesive seal

Attach the foam adhesive seal along the bottom of the bottom curtain guide.

A

B

A. Curtain housing

B. Foam adhesive seal

Install Cabinet into Window

NOTES:

Handle the air conditioner gently.

Be sure your air conditioner cabinet does not fall out of the opening during installation or removal.

The location where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded

3 prong outlet.

Do not block the louvers on the front panel.

Do not block the louvers on the outside of the air conditioner.

1.Center the empty cabinet in the window. Check that the lower rail of the air conditioner cabinet is behind and against the back side of the windowsill. Maintain a firm hold on the air conditioner cabinet. Lower the window sash to hold the cabinet in place.

2.Measure the distance between the right-hand side of the cabinet and the inside of the window channel.

7

Page 7
Image 7
Whirlpool ACE184PT0 Attach Side Curtains, Top view, Bottom view, Attach foam adhesive seal, Install Cabinet into Window

ACE184PT0 specifications

The Whirlpool ACE184PT0 is a well-engineered appliance that caters to the needs of modern households looking for efficient cooling solutions. This air conditioner is designed with user-friendliness and advanced technology in mind, ensuring an optimal indoor climate during the hottest months of the year.

One of the standout features of the ACE184PT0 is its impressive cooling capacity, allowing it to effectively cool spaces up to a substantial square footage. With a sleek and compact design, this air conditioner can fit seamlessly into various room layouts without taking up too much space. Its aesthetically pleasing appearance is complemented by a user-friendly control panel, which simplifies the operation.

The ACE184PT0 incorporates advanced inverter technology. This innovation allows for variable speed operation, providing precise temperature control while enhancing energy efficiency. By adjusting the compressor speed according to the current cooling requirements, this air conditioner significantly reduces energy consumption compared to traditional models. This not only leads to lower electricity bills but also contributes positively to environmental sustainability.

Whirlpool has equipped the ACE184PT0 with a multi-stage filtration system, which plays a crucial role in maintaining indoor air quality. This system captures dust, allergens, and other particulate matter, ensuring that the air circulated within the room is clean and fresh. The washable filter can be easily removed and cleaned, extending its lifespan and maintaining optimal performance.

In addition to powerful cooling capabilities, the ACE184PT0 also features a dehumidification option. This is particularly beneficial in humid climates, as it helps to reduce excess moisture in the air, making the environment more comfortable. The user can switch effortlessly between various cooling and dehumidifying modes to suit their preferences.

Another noteworthy characteristic is the programmable timer and remote control feature. This allows users to set cooling schedules tailored to their lifestyle, enabling the unit to turn on or off automatically, resulting in added convenience and energy savings.

With its combination of aesthetic appeal, energy efficiency, multiple functionalities, and advanced technologies, the Whirlpool ACE184PT0 is an excellent choice for consumers seeking reliable and effective air conditioning solutions for their homes.