Whirlpool ACE184PT0 To Set the Timer Delay, Vent Control on some models, Fan Speed, Temperature

To Set the Timer Delay

To set Timer to turn off the air conditioner (air conditioner must be on):

1.Press TIMER. Timer indicator light on the air conditioner control panel will flash.

TIMER

2.Press the plus or minus button to change the delay time from 1 to 24 hours.

3.Press TIMER again or wait 10 seconds. Timer indicator light on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, keeping previous settings:

1.Turn off the air conditioner.

2.Press TIMER. Timer indicator light on the air conditioner control panel will flash.

3.Press the plus or minus button to change delay time from 1 to 24 hours.

4.Press TIMER again or wait 10 seconds. Timer indicator light on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the previous settings:

1.Turn on the air conditioner.

2.Adjust the mode to Cool, Fan, or Power Saver.

3.Adjust the fan speed to Turbo, High, Low, or Auto.

4.Adjust temperature between 64°F and 86°F (18ºC and 30ºC).

5.Turn off the air conditioner.

6.Press TIMER. Timer indicator light on the air conditioner control panel will flash.

7.Press the plus or minus button to change delay time from 1 to 24 hours.

8.Press TIMER again or wait 10 seconds. Timer indicator light on the air conditioner control panel will remain on.

Starting Your Air Conditioner—Rotary Control—Cool Only Models

		Wait three minutes before restarting
4			LOW
			COOL
3	5	FAN	HIGH
		ONLY	COOL
2	6	OFF	TURBO
			COOL
1	7
WARMER	COOLER

T E M P E R A T U R E AIR SWING F A N S P E E D

1.Set vent control. See “Vent Control (on some models).”

2.Select the fan speed. See “Fan Speed.”

3.Set temperature. See “Temperature.”

Vent Control (on some models)

Set the Vent control to CLOSE for maximum continuous cooling. The Vent control set to OPEN allows you to draw stale or smoky air from the room.

■Open—to exhaust room air to the outside.

■Close—to circulate room air.

NOTE: The Vent control will function only when the Fan Speed is operating.

Fan Speed

Set Fan Speed to the desired setting. When the air conditioner is operating at Turbo Cool, High Cool, or Low Cool, the fan circulates air continuously.

■Turbo Cool—for maximum cooling

■High Cool—for normal to maximum cooling (depending on model)

■Low Cool—for sleeping comfort

■Fan Only—to move air continuously without cooling

	LOW
	COOL
FAN	HIGH
ONLY	COOL
OFF	TURBO
	COOL

Temperature

Turn the TEMPERATURE control to a mid-setting. Adjust the air conditioner's performance by turning the Temperature control clockwise for maximum cooling. For less cooling, turn the TEMPERATURE control counterclockwise. Experiment to find the setting that suits you best.

4

35

2 6

17

WARMER COOLER

14