Krell Industries 7.1 manual Remote Control Description, Battery Installation And Removal, Amp Key

Remote Control Description

See Figure 3 on page 17

BATTERY INSTALLATION AND REMOVAL

Notes

The Home Theater Standard 7.1 remote control provides on and off, input selection, processing mode selection, speaker volume and bal- ance adjust, and mute functions, as well as access to the system configuration menu.

To send operational instructions directly to the Home Theater Standard 7.1 using an RS-232-based external computer control sys- tem, see RS-232 Port: Sending Commands and Interpreting Data, the developer’s reference for the Home Theater Standard 7.1.

The Home Theater Standard 7.1 remote control uses one CR2025 lithium battery, which is included with the shipment.

To open the battery compartment on the back of the remote control:

1.Place the remote face down on the table.

2.Use your thumbnail or a small jeweler’s or eyeglass screwdriver to move the small tab toward the center of the remote, while using your index fingernail or screwdriver to pull down gently on the slot to the right of the tab. The battery compartment will slide out.

3.Place the battery, plus side up, in the battery tray.

4.Slide battery compartment back into the remote until you hear a click.

The remote control is ready for operation.

Do not use a knife or other sharp objects to open the battery compartment; they will scratch the remote control finish.

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not to be used for a long period of time. Battery leakage can damage the remote control.

FEATURES

Power Keys

Note

Home Theater Standard 7.1 remote control keys and their functions are described below:

57 Amp Key

Use this key to power on/off a Krell remote control amplifier.

58 Pre Key (Power Pre Key)

Use this key to switch the Home Theater Standard 7.1 between the stand-by mode and the operational mode.

When you power off while zone 2 is selected, only zone 2 turns off. Press the power button or the power pre key a second time to power off the main zone.

18 Krell Home Theater Standard 7.1