Krell Industries 7.1 manual far right column

System Configuration, continued

Speaker Setup Screen,	Using this screen, you can enable loudspeakers that are in your sys-
continued	tem in the left column and select loudspeaker characteristics in the
	far right column.
	FULL RANGE
	FULL RANGE sends 20Hz to 20KHz signals to the loudspeaker. LIMITED
	sends information from the crossover frequency (see below) to
	20KHz to the loudspeaker. The frequencies below the crossover fre-
	quency are sent to the subwoofer if present; otherwise, these low fre-
	quencies are sent to the full range loudspeakers in the system.
	SUB
	Select NORMAL or ENHANCED to choose the amount of bass information
	sent to the subwoofer. NORMAL sends the low frequencies from the
	limited speakers and the .1 (or LFE) signal to the subwoofer.
	ENHANCED sends additional bass information from the left and right
	loudspeakers to the subwoofer in addition to the low frequencies
	from the limited loudspeakers and the .1 (or LFE) signal.
	CRSOVR
	Crossover selections are 120, 100, 80, 60, and 40 Hz. The standard
	crossover setting is 80 Hz. Choose the crossover frequency appropri-
	ate for your loudspeakers. The frequencies below the crossover
	frequency are sent to the subwoofer if a subwoofer is present; other-
	wise, these low frequencies are sent to the full range loudspeakers in
	the system.
	5.1 SURR
	Select SURROUND, BACK, or BOTH to choose which loudspeakers in a
	6.1 or 7.1 system receive surround information when playing a Dolby
	Digital 5.1 or DTS 5.1 encoded software. SURROUND sends surround
	channel information to your surround loudspeakers only. BACK sends
	surround channel information to your back loudspeakers only. BOTH
	sends surround channel information to your surround and back loud-
	speakers simultaneously.
	After selecting the appropriate loudspeaker setups for your system,
	press the previous key twice to return to the main menu.

How To Navigate the Menu

and Make a Selection

1.Use the direction keys to scroll from line to line.

2.Press enter to select a line.

3.Use the direction keys to scroll through options within a line.

4.Press enter to select and set an option.

5.Use the direction keys to scroll to the next line.

36 Krell Home Theater Standard 7.1