Krell Industries 7.1 manual Analog Input Trim, 0 DB

System Configuration, continued

Analog Input Trim	Use the ANALOG INPUT TRIM menu to measure the level of an analog
	input source to the Home Theater Standard 7.1.
	Select ANALOG INPUT TRIM from the CONFIGURE LEVELS menu. The ANALOG
	INPUT TRIM screen appears:
Analog Input Trim Screen
			KRELL HTS
		-ANALOG INPUT TRIM-
			LEFT			RIGHT
		CLIP INDICATOR
		ANTI-CLIP		 ON 
		INPUT GAIN			0 DB

ANTI-CLIP

INPUT GAIN

How To Navigate the Menu and Make a Selection

1.Use the direction keys to scroll from line to line.

2.Press enter to select a line.

3.Use the direction keys to scroll through options within a line.

4.Press enter to select and set an option.

5.Use the direction keys to scroll to the next line.

Use the direction keys (81) to select the anti-clip option you want (ON or OFF) and the input gain decibel level.

ON

The anti-clip function measures the signal level and prevents the input signal from overloading (clipping) the analog-to-digital converters.

OFF

Disengages the anti-clip function.

Boost weaker signals by increasing the input gain value. Use the direction and enter keys to select the number of dB.

To maximize your system’s signal-to-noise ratio without clipping, increase the input gain value applied to the signal until you see the clip indicator illuminate on the screen; then back the input gain value off 1 dB. The optimal signal gain value will vary from source to source.

After selecting the anti-clip and input gain options for your analog devices, press the previous key (80) once to return to the CONFIGURE

LEVELS menu.

52 Krell Home Theater Standard 7.1