Krell Industries 7.1 manual Connect, Amplifiers and, Loudspeakers

Connecting the Home Theater Standard 7.1 to Your System, continued

Step 7: Connect	The Home Theater Standard 7.1 has balanced outputs with XLR
Amplifiers and	connectors, single-ended outputs with RCA connectors, and is
Loudspeakers	equipped with a DB-25 multichannel output. These output formats
	are active at all times, allowing simultaneous connection to separate
	amplifiers. Use only one output format per amplifier.
IMPORTANT	Make sure that all sources are off when you configure the Home
	Theater Standard 7.1.
	1. Connect the outputs of the Home Theater Standard 7.1 to the
	input(s) of your power amplifier(s).
	Use the DB-25 connector to connect to a DB-25-equipped
	amplifier:
	Connect the DB-25 output on the Home Theater Standard 7.1 to
	the DB-25 multichannel input on the back panel of your amplifier.
	The DB-25 cable simultaneously transmits audio outputs and
	Trigger 1 signals from the DB-25 output of the Home Theater
	Standard 7.1 to all inputs and to a 5 VDC (5 Volt trigger) via the
	DB-25 input device.
	If you are connecting the Home Theater Standard 7.1 to an amplifier via a
Note
	DB-25 connector, you need to configure Trigger 1 on the Home Theater
	Standard 7.1 to send a 5 Volt trigger signal before operating the amplifier.
	2. Connect the power amplifiers to the loudspeakers.
	3. Connect the AC power cord to the IEC connector (56) on the
	Home Theater Standard 7.1 and to the AC wall outlet.
	4. Move the back panel power switch (55) into the up (on) position.
	The red power LED on the front panel illuminates. The words
	PLEASE WAIT, INITIALIZING appear in the front panel display (24).
	When the initializing message disappears, the Home Theater
	Standard 7.1 is ready to switch to the operational mode.
	5. Use either the front panel power button (1) or the remote control
	power pre key (58) to power on the Home Theater Standard 7.1.
	The blue power LED (2) on the front panel illuminates. The Home
	Theater Standard 7.1 is now in the operational mode and ready
	to be configured.

Krell Home Theater Standard 7.1 31