Connecting the Home Theater Standard 7.1 to Your System, continued
Step 3: Connect | The Home Theater Standard 7.1 is equipped with six coaxial digital |
Digital Sources | audio inputs (44) via RCA connectors and two digital EIAJ optical |
| inputs (43) via TosLink connectors. Connect the digital audio output |
| of your source components to the digital inputs on the Home Theater |
| Standard 7.1. |
| For sources that are equipped with both digital and analog outputs, the digi- |
Note | |
| tal outputs should be connected for listening in the main zone; the analog |
| outputs should be connected for listening in zone 2 and for recording from |
| the main zone or zone 2. |
Please read before continuing on to Step 4
1.The Home Theater Standard 7.1 will only operate correctly:
•When the video source signal (component,
•When the video device is configured for that same signal (com- ponent,
2.If you select the video signal that is the factory default for the video device (for example: a component signal for the DVD), you do not need to configure the video signal in the Home Theater Standard 7.1 configuration menu. See Figure 4, for North American operation, on page 25, and Figure 5, for overseas operation, on page 26.
3.If you are not using the default video signal, you must use the configuration menu in the Home Theater Standard 7.1 and change the video signal for the video device.
4.You need the remote control and the on screen display (OSD) to access the configuration menu.
5.In order for the OSD to be visible:
•Set your monitor to NTSC Interlaced for North American operation,
or
•Set your monitor to PAL Interlaced or NTSC Interlaced for overseas operation.
When your monitor is set to NTSC Progressive or PAL Progressive, the OSD will not be visible.
6.The video device LED must be illuminated on the front panel of the Home Theater Standard 7.1 in order for the OSD to be visible.
Krell Home Theater Standard 7.1 | 23 |