Krell Industries 7.1 Instructions for Use, Contact Information, Warnings, Home Theater Standard

Models: 7.1

1 86
Download 86 pages 41.01 Kb
Page 2
Image 2
Home Theater Standard 7.1

Home Theater Standard 7.1

Surround Preamp/Processor

Instructions for Use

v 02.3

CONTACT

INFORMATION

Krell Industries, Inc.

45 Connair Road

Orange, CT 06477-3650 USA

TEL 203-799-9954

FAX 203-891-2028 E-MAIL krell@krellonline.com WEBSITE http://www.krellonline.com

 

This product complies with the EMC directive (89/336/EEC) and the low-voltage

 

directive (73/23/EEC).

WARNINGS

The Home Theater Standard 7.1 must be placed on a firm level surface where it is

 

not exposed to dripping or splashing.

 

The ventilation grids on the top and bottom of the Home Theater Standard 7.1

 

must be unobstructed at all times during operation. Do not place flammable mater-

 

ial above or beneath the component.

 

Do not remove or bypass the ground pin on the end of the AC power cord. This

 

could cause radio frequency interference (RFI) to be introduced into your playback

 

system.

 

Before making connections to the Home Theater Standard 7.1, make sure the back

 

panel power switch is off. Make sure all cable terminations are of the highest quali-

 

ty and free from frayed ends, short circuits, or cold solder joints.

 

THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.

 

Please contact your authorized Krell dealer, distributor, or Krell if you have any

 

questions not addressed in this Owner’s Reference.

 

DTS Digital Surround ™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD soft-

 

ware which consequently cannot be decoded and played back inside most CD, LD, or DVD players. For this

 

reason, when DTS-encoded software is played back through the analog outputs of the CD, LD, or DVD play-

 

er, excessive noise will be exhibited. To avoid possible damage to the audio system, proper precautions

 

should be taken by the consumer if the analog outputs are connected directly to an amplification system. To

 

enjoy DTS Digital Surround ™ playback, an external 5.1 channel DTS Digital Surround ™ decoder system

 

must be connected to the digital output (S/PDIF, AES/EBU, or TosLink) of the CD, LD, or DVD player.

 

This product is manufactured in the United States of America. Krell® is a registered trademark of Krell

 

Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. Krell

 

Current Mode™ and Smart System Setup™ are trademarks of Krell Industries, Inc. “DTS”, “DTS Digital

 

Surround”, “DTS ES Extended Surround”, and “Neo:6” are registered trademarks of Digital Theater

 

Systems, Inc. TosLink is a trademark of Toshiba Corporation. Manufactured under license from Dolby

 

Laboratories. "Dolby," "Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories.

 

Confidential Unpublished Works. Copyright 1992–1997 Dolby Laboratories, Inc. All rights reserved. THX is

 

a registered trademark of Lucasfilm, Ltd. Re-Equalization, Timbre Matching, and Decorrelation are trade-

 

marks of Lucasfilm, Ltd. All other trademarks and trade names are registered to their respective companies.

© 2002 by Krell Industries, Inc. All rights reserved

P/N 305947

Page 2
Image 2
Krell Industries 7.1 Instructions for Use, Contact Information, Warnings, Home Theater Standard, Surround Preamp/Processor