Krell Industries 7.1 manual Play in the Main Zone and Record in Zone, Simulcast

Operating the Home Theater Standard 7.1, continued

Play in the Main Zone

and Record

in Zone 2

SIMULCAST

1.Press the power pre key (58), then select the input device that you want to play through the main zone. The main zone LED illu- minates. Begin playing the device.

2.To record at the same time, press the Z2 key (60), then select the source that you want to record by pressing the input device selection key. After the zone 2 device LED illuminates, press the input device selection key again. The front panel display reads:

TAPE OUT CHANGED TO ZONE 2

Start playing the source that you wish to record. Recording begins when you start playing the source.

3.To monitor the output being recorded, switch back to the main zone, then press the input device selection key for the device being recorded. The material being recorded plays through the main zone.

4.Press the input selected for main zone playback to return the main zone to playing its original material. The recording will con- tinue uninterrupted through zone 2.

When you are listening to or viewing a number of sources with devices that have different trigger settings (configured through the setup menus), you can retain a trigger setting using the previous (80) key.

For example, you have configured your Home Theater Standard 7.1 to turn on your TV monitor when trigger 4 is on and your CD player is set for TRIGGER 4 OFF. You want to watch TV and listen to a CD at the same time. If you press the TV button or key followed by the CD but- ton or key, the TV monitor will turn off.

To keep the monitor on and turn on the CD player, follow these steps:

1.Press the TV button (9) or key (64) to select the device. Begin playing the source.

2.Press the prev key (80).

3.Press the CD button (10) or key (65). Begin playing the source.

74 Krell Home Theater Standard 7.1